Selected Informations

Informations for reference only. – For further informations, please contact our sales office.
Corresponding to your previous selections, the list only shows a summary of selected informations which are available online. Discover the right products for your application in the documentations and specifications. For special products, descriptions, or informations which are not listed here, please contact our sales office.
1-Gang Surface Boxes, Aluminum, 53xx-0 Series
USA, Canada
 
1-Gang Weather Resistant Wallplate, Horizontal, Die-Cast Zinc, Self Closing Lids, NEMA 3R
USA, Canada
4" Round Splice Boxes, Extension Adapters and Cover
USA, Canada
4" Square Boxes, 1-1/4" and 1-1/2" deep
USA
4" Square Boxes, 2-1/8" deep
USA
4" Square Boxes, Steel, 1-1/4" deep and 1-1/2" deep, with Knockouts
USA
4" Square Covers
USA, Canada
4" Square Covers
USA, Canada
4-11/16" Square Conduit Boxes are used for a wide variety of industrial applications where larger sized conductors or wiring devices are needed and more volume is required
USA
4-11/16" Square Exposed Work Covers are used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications
USA
90 Degree Short Angle Connectors, for use with EMT conduit to bond EMT conduit to a box or enclosure
USA, Canada
90 Degree Short Elbows, For Use With Threaded Rigid/IMC Conduit, UL Standard 514B
USA
Accessories Photocells and Hardware
USA, Canada
Accessories for Metal Boxes (Grounding Pigtails, Screws and Clips)
USA, Canada
Aluminum Cable Glands, Series 480x, NPT
USA, Canada
Aluminum Straight Strain Relief Cord Connetors, 480x Series, NPT Sizes
USA, Canada
Armored and Metal Clad Cable Connectors
USA, Canada
Clamp Type Cable Connectors, For use in dry locations to connect Nonmetallic Sheathed Cable (NMSC) to a box or enclosure
USA, Canada
Clamp Type Connector for Nonmetallic Sheated Cable (NMSC)
USA
Closure Plugs, Rugged Die Cast Zinc, NPT Thread
USA, Canada
Cluster Covers Die Cast Zinc
USA, Canada
Complete Outdoor Flip Cover Kits, For use in wet or damp or dry locations, Duplex or Duplex GFCI Receptacle, 15 Amp, 125 Volt AC, NEMA 5-15R, UL and/or c(UL)us Listed
USA, Canada
Conduit Nipples, Connectors and Bushings
USA, Canada
Conduit and Sealing Locknuts, Sealing Washers
USA, Canada
Cord Connectors, Nylon, 1/2" NPT
USA, Canada
Cord Connectors, Nylon, 1/4" NPT and 3/8" NPT
USA, Canada
Cord Connectors, Nylon, 3/4" NPT and 1" NPT
USA, Canada
Covers and Gaskets for Conduit Bodies
USA
Decorator Switch Covers, Weatherproof, NEMA 3R, Compatible with single pole or 3-way decorator switches, One to three Gang, Colors: Gray, White or Bronze
USA, Canada
Die Cast Aluminum Single-Gang Boxes, NEMA 3R Rated, Wet, Damp or Dry Locations
USA, Canada
Die Cast Aluminum Single-Gang Boxes, NEMA 3R Rated, Wet, Damp or Dry Locations
USA, Canada
Die Cast Aluminum Single-Gang Extensions and Adapters
USA, Canada
Die Cast EMT Compression Connectors
USA, Canada
Die Cast Zinc Lampholders
USA, Canada
EMT Compression Connectors Raintight, Insulated and UnInsulated Throat, Steel, 1/2" to 4" Trade Size
USA, Canada
EMT Compression Couplings Raintight, Steel, 1/2" to 4" Trade Size
USA, Canada
EMT Conduit Handy Ellbows, Female-Female or Male-Female, 1/2" to 1" Trade Size
USA, Canada
EMT Die Cast Compression Couplings
USA, Canada
EMT Fittings Die Cast Handy Ells
USA, Canada
EMT Fittings, Compression Connectors, Steel (Zinc Plated)
USA, Canada
EMT Fittings, Compression Couplings, Die Cast Zinc
USA, Canada
EMT Fittings, Compression Couplings, Steel (Zinc Plated)
USA, Canada
EMT Fittings, Die Cast Compression Connectors
USA, Canada
EMT Fittings, Steel Compression Connectors
USA, Canada
EMT Set Screw Connectors, Steel, Insulated and UnInulated Throat, 1/2" to 4" Trade Size
USA, Canada
EMT Set Screw Couplings, Steel, 1/2" to 4" Trade Size
USA, Canada
EMT Steel Combination Couplings, Threaded/Compression, 1/2"NPT to 1"NPT
USA
 
EMT Steel Compression Connectors, Sizes 1/2" to 4"
USA, Canada
EMT Steel Set Screw Connectors
USA, Canada
EMT to FLEX Couplings
USA, Canada
Exposed Work Cover, 4" Square
USA, Canada
Exposed Work Steel Covers, 4" Square (101.6x101.6)mm. Covers are used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications.
USA, Canada
Flexible Metal Conduit Combination Couplings and Nail-Up Straps
USA, Canada
Flexible Metal Conduit Fittings Die Cast Zinc/Steel Combination Couplings and Nail-Up Straps
USA, Canada
Flexible Metal Conduit Fittings, Die Cast Zinc Straight Squeeze Connectors
USA
Flush Mount Steel Boxes, UL 514A, NEMA OS1 (e.g. Type 565)
USA
Flush or Surface Mount Steel "HANDY"-Boxes w/KO's
USA, Canada
Gangable & Non-Gangable Switch Boxes, Single-Gang, 2-1/2" (63.5mm) Deep
USA
Handy Box Covers
USA, Canada
 
Handy Boxes and Extensions, 1-1/2", 1-7/8" and 2-1/8" deep
USA
Handy Boxes, 1-1/2" and 1-7/8" deep
USA, Canada
Handy Boxes, Made of Welded or Drawn Steel, also called Utility Boxes, are used for Convenience Outlets, Switch Boxes or small Junction Boxes.
USA, Canada
Hollow Wall Type Switch Boxes, Plastic & Gangable
USA, Canada
Horizontal Mtg 1-Gang Wet Locations Device Covers
USA, Canada
Insulated Grounding Bushings, Malleable Iron, for Use with threaded Rigid/IMC Conduit
USA, Canada
Insulated Nipples, Die Cast Zinc
USA, Canada
Lampholder Combinations
USA, Canada
Liquidtight Conduit Connectors, 45 Degree, NPT Sizes, Malleable Iron, Insulated and UnInsulated Throat
USA, Canada
Liquidtight Conduit and Cord Connectors, Angled, Steel/Malleable Iron, Strain Relief Cord Connectors, for Wet or Dry & Hazardous Locations
USA, Canada
Liquidtight Conduit and Cord Connectors
USA, Canada
Liquidtight Connectors for Extra-Flex Tube #67...
USA, Canada
Liquidtight Connectors for Flexible Conduit
USA, Canada
Liquidtight Connectors used with Type "A" Conduit
USA, Canada
Liquidtight Flexible Nonmetallic Conduit
USA, Canada
Liquidtight Strain Relief Cord Connectors, Straight, 1/2" HUBS, Steel/Malleable Iron, Compliance c(UL)us , Suitable for Wet or Dry and Hazardous Locations
USA, Canada
Liquidtight Strain Relief Cord Connectors, Straight, 3/4" and 1" HUBS, Steel/Malleable Iron, Compliance c(UL)us , Suitable for Wet or Dry and Hazardous Locations
USA, Canada
Liquidtight Strain Relief Cord Connectors, Straight, 1-1/4" and 1-1/2" HUBS, Steel/Malleable Iron, Compliance c(UL)us , Suitable for Wet or Dry and Hazardous Locations
USA, Canada
Locking/Power Receptacle Wet Location Wallplates
USA, Canada
Malleable Iron Clampbacks for Rigid, IMC and EMT Conduit
USA, Canada
Masonry Boxes, 2-1/2" and 3-1/2" deep
USA
Mini Wet Location Cover and Receptacle NEMA 5-15R, 125V AC, 15 Amps.
USA, Canada
Mini Wet Location Cover and Receptacle NEMA 5-15R
USA, Canada
Miscellaneous Fittings, Steel Conduit Hangers with Bolts
USA, Canada
Multi-Gang Boxes and Extensions Die Cast Aluminum
USA, Canada
Non-Metallic (Gray PVC) Surface Boxes and Snap-On Covers
USA
Non-Metallic Outlet Boxes, 1-Gang or 2-Gang and Round Versions, Marine (UL) Listed, 2014 NEC® compliant, NEMA 3R rated, For general use whenever weatherproof protection is required.
USA
Non-Metallic, Extra Flexible Tubing and Connectors
USA, Canada
Nonmetallic Cable Boxes
USA
Nonmetallic Cable Boxes, Heavy-Duty PVC Compound, UL 514-C, UL Green Book, UL Orange Book
USA
Nonmetallic Cable Boxes, Heavy-Duty PVC/Polycarbonate
USA
Nonmetallic Cable Boxes, Made of Heavy-Duty PVC Compound, UL Standard 514C, UL Green Book, UL Orange Book, Old Work
USA
Nonmetallic Cable Boxes, PVC, Polycarbonate
USA, Canada
 
Nonmetallic Cable Boxes, Single Gang, Heavy Duty PVC compound
USA
Nonmetallic Covers, Plaster Rings, Partitions & Straps
USA
Nylon Cable Glands, Series 47xx, NPT
USA, Canada
Offset Connectors, For Use to Bond EMT Conduit to a Box, UL Standard 514B
USA, Canada
One Hole Push-On Straps, Stamped Steel, for EMT Conduit
International
Outdoor Singe-Gang Device Covers, horizontal and vertical Mount, self-closing Lid, Die Cast Aluminum, NEMA 3R, UL, CSA
USA, Canada
Plastic Nailer Type Switch Boxes, e.g. Type 7302
USA, Canada
Plenum Boxes and Cover, 4 inch Square, Drawn with Conduit KO′s Gasketed Cover for 4 inch Square Boxes, UL Listed
USA, Canada
Product Line Overview: RACO Steel Boxes and Covers, Switch Boxes and Wallplates, Non-Metallic and Floor Boxes, EMT and Rigid Fittings, Cord Connectors and Cable Glands, Weatherproof Boxes and Covers, Specialty Switches
USA, Canada, Mexico
RAYNTITE Two-Gang Device Covers, Weatherproof NEMA 3R, Rugged Die Cast Construction
USA, Canada
RAYNTITE® M.R. SRT Single-Gang Weatherproof-While-In-Use Covers, Vertical
USA, Canada
RAYNTITE® M.R. SRT Single-Gang Weatherproof-While-In-Use Covers, Vertical
USA, Canada
Rigid and IMC Compression Connectors
USA, Canada
Rigid and IMC Compression Couplings
USA, Canada
Rigid and IMC Conduit Bodies Type LB
USA, Canada
Rigid and IMC Fittings Die Cast Handy Ells
USA, Canada
Rigid and IMC Fittings, One Hole Push-On Straps, Zinc Plated Stamped Steel
USA, Canada
Rigid and IMC Fittings, Steel Reducing Bushings
USA, Canada
Rigid and IMC Fittings, Steel/Malleable Iron Compression Couplings
USA, Canada
Rigid and IMC Insulated Bushings, High Impact Polypropylene, 1/2" to 6"
USA, Canada
Rigid and IMC Insulated Grounding Bushings
USA
Rigid and IMC Steel Locknuts
USA, Canada
Rigid and IMC Steel Locknuts, 3/8" to 6" Trade Size
USA, Canada
Rigid and IMC Threaded Hubs
USA, Canada
Rigid/IMC Compression Connectors, 1/2" to 4" Trade Size, Steel/Malleable Iron
USA, Canada
Rigid/IMC Conduit Handy Ellbows, 1/2" to 1-1/4" Trade Size, Female-Female or Male-Female, Die Cast Zinc
USA, Canada
Rigid/IMC Set Screw Conduit Connectors, Insulated or UnInsulated Throat, Steel, 1/2" to 4" Trade Size
USA
Rigid/IMC Set Screw Conduit Couplings, 1/2" to 4" Trade Size, Zinc Plated Steel
USA
Screw-In Fittings & Connectors for Flexible Metal Conduit
USA
Screw-In Type Connectors and Couplings for Flexible Metal Conduit, Die Cast Zinc
USA, Canada
Sealing Washers, Steel, For use whenever a positive seal is required between the shoulder of a fitting and an enclosure
USA, Canada
Single Gang Nonmetallic Cable Boxes
USA
Single Gang Switch Boxes
USA
Single Gang Switch Boxes, 2-1/2" deep
USA
Single-Gang Blank Covers and Mini-Plate
USA, Canada
Single-Gang Device Covers, Weatherproof
USA, Canada
Single-Gang Device Covers, Weatherproof, Die Cast Aluminum
USA, Canada
Single-Gang Extensions and Adapters, Die-Cast Aluminum, NEMA 3R
USA, Canada
Single-Gang Lever Switch Covers with "on-off" Type Switch, NEMA 3R
USA, Canada
Single-Gang Lever Switch Covers, Weatherproof
USA, Canada
Single-Gang Weatherproof GFCI Device Covers, NEMA 3R
USA, Canada
 
Single-Gang Weatherproof While-In-Use Covers
USA, Canada
 
Single-Gang Weatherproof While-In-Use Covers, NEMA 3R, NEC 410-57(b)
USA, Canada
Special Steel Device Covers used with "HANDY"-Box
USA, Canada
Square Boxes 4" (101.6 x 101.6)mm, Inside Deep 2-1/8" (54.0mm), Welded Steel with Conduit KO′s, 30.3 Cubic Inches. Square boxes are used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices.
USA
Steel 4 Inch Square Boxes with 1/2" and 3/4" Knock-Outs
USA
Steel Box, 4" Square
USA
Steel Cable Glands, Series 37xx, NPT
USA, Canada
Steel Conduit Hangers with Bolts
USA, Canada
Steel Cord Connectors 1/2" NPT, 3702 Series
USA, Canada
Steel Cord Connectors 3/4" NPT, 3703 Series
USA, Canada
Steel Cord Connectors NPT, 3704/3705/3706 Series
USA, Canada
Steel Device Covers for 4 Inch Square Boxes
USA, Canada
Steel Handy or Utility Box Covers and Extensions, Handy Box covers are used to close a Handy Box, Covers also may be used as single gang wall plates
USA, Canada
Steel Masonry Boxes, 1-Gang to 6-Gang, 2-1/2" (63.5mm) Deep or 3-1/2" (88.9mm) Deep, Nongangable with Conduit KO′s, Masonry boxes are designed to accommodate the mounting of switches or other devices in masonry walls
USA
Steel Octagon Boxes with Side Mounting Bracket and Covers
USA
Steel Reducing Bushings
USA
Steel Set Screw Connectors and Couplings for EMT
USA, Canada
Straight Connectors, Nylon, for use with Type B Conduit, dry and wet locations
USA, Canada
Straight Liquidtight Conduit Connectors, Steel/Malleable Iron, UL Standard 514B, CSA C22.2 #18, Suitable for Hazardous Locations, For use in outdoor or indoor locations on flexible metallic liquidtight conduit and Type B flexible nometallic liquidtight conduit
USA, Canada
Straight Squeeze Connectors for use with Flexible Metal Conduit, Malleable Iron
USA, Canada
Strain Relief Cord Connectors, Nonmetallic Nylon, Suitable for use in Class I, Div 2; Class II, Div 1 & 2; and Class III, Div 1 & 2 hazardous locations
USA, Canada
Surface Cast Aluminum Weatherproof 2-Gang Boxes (#53xx-0)
USA
Threaded Conduit Body, Malleable Iron, Type C
USA
Threaded Conduit Body, Malleable Iron, Type LB
USA
Threaded Conduit Body, Malleable Iron, Type LL
USA
Threaded Conduit Body, Malleable Iron, Type LR
USA
Threaded Conduit Body, Malleable Iron, Type T
USA
Threaded Conduit Body, Malleable Iron, Type X
USA
Threaded Hubs for use with Rigid/IMC Conduit
USA, Canada
Threaded Hubs, Insulated Throat, For use with threaded rigid/IMC conduit to connect and bond conduit to a threadless opening in a box or enclosure, May be used in wet or dry locations
USA, Canada
Two Hole Steel Straps for EMT Conduit
USA, Canada
Two-Gang Boxes, Die cast Aluminum, Surface Mount
USA, Canada
Two-Gang Device Covers
USA, Canada
Two-Gang Die-Cast Aluminum Boxes for use in branch circuit wiring in wet, damp, or dry locations.
USA, Canada
Two-Gang and Three-Gang Device Covers
USA, Canada
Type B Liquitight Flexible Nonmetallic Conduit, Sizes 3/8" to 2"
USA, Canada
Uninsulated Die Cast Zinc Nipples, 1/2" to 4"
USA, Canada
Vertical Mtg 1-Gang Wet Locations Device Covers
USA, Canada
Weather Resistant Boots for Plugs and Connectors
USA, Canada
Weatherproof 2-Gang Aluminum Duplex Device Covers
USA, Canada
Weatherproof Blank Covers, Rated NEMA 3R, c(UL)us Listed, Single Gang and Two Gang or Three Gang Models, Gray and White or Bronze Finish, For use whenever weatherproof protection is required for a weatherproof box.
USA, Canada
Weatherproof Box Extension for 1- & 2-Gang Boxes
USA, Canada
Weatherproof Device Covers, NEMA 3R, Rugged Metallic Construction, Self-Closing Lid
USA, Canada
Weatherproof Three Gang Device Covers and Surface Mounting Box, UL/cUL Listed, NEMA 3R Rated, For use whenever weatherproof protection is required for an outdoor receptacle
USA, Canada
Weatherproof Two-Gang Device Covers
USA, Canada
Weatherproof While-In-Use Covers, Polycarbonate
USA, Canada
Wet Location Aluminum Blank Wallplates, 1-/2-Gang
USA, Canada
Wet Location Cover # 5180-0 for Duplex Receptacle
USA, Canada
Wet Location Cover and Switch Combinations
USA, Canada
Wet Location Lever Switch Cover, 5121-0 Series
USA, Canada
Wet Location Single Receptacle or Switch Covers
USA, Canada
Wet Locations Aluminum Single-Gang Surface Boxes
USA, Canada
Wet Locations Aluminum Two-Gang Surface Boxes
USA, Canada
Wet Locations Single-Gang Die Cast Device Cover for use with Duplex Receptacles
USA, Canada
Wet Locations Single-Gang Die Cast Device Covers for use with Single Receptacles, Duplex Devices or GFCI Devices, NEMA 3R
USA, Canada
While In Use Cover One Gang Deep Multi Directional
USA, Canada