Product availability
Contact our sales office to get additional information
Catalog No. : 572112
EDP Number : 125150
Target Countries : Australia, New Zealand
Description :
Modular Socket Outlet, Australia/New Zealand, Color: White, 10/15 Amp, 2P+E, Meets AS/NZS 3112, Screw Terminals, Module Face Size (45x45)mm, Ref. AR787/15AMWE
Country of origin : CN – CHINA
Taric Number : 85366990
Subject to change
Brandname : Legrand
TECHNICAL INFORMATION
Logistic Informations
Standard qty. : 100 Each
Carton quantity (VPE) : 10 Each
Shipping weight : 0.055 kg / Each
Gross volume : 0.174 m³ / 1000
Net weight : 0.045 kg / Each
General Specifications
Model Name : Modular Socket Outlet, 10A/15A, L+N+PE, Australian Standard AS/NZS 3112, IEC Type I, White
Model Number : AR787/15AMWE
Mounting method : Module frame
Number of units : 1
Number of modules (module system) : 2
Operation : Standard operation by insertion of withdrawal of a plug to normalized standard
Electrical Specifications
Nominal current : 15 A (Takes 10 A Plugs also)
Nominal voltage : 240 Volt AC
Frequency : 50-60 Hz
Poles and Wires : 2P3W Grounding (L+N+PE)
Number of phases : 1
Protective contact : Flat
Number of active contacts (flat) : 1
Self-Extinguishing : 650°C / 30s
Mechanical Specifications
Connection type : Screwed terminal
With enhanced contact protection : Yes
Imprint / Indication : Other
Type of fastening : Snap mounting (engagement)
With loop through function : Yes
Cable nature for connection : Flexible or rigid
Cable section : 4-4 mm²
Cable support : Other
Cover : Central cover plate
Material Specifications
Material : Plastic
Material quality : Thermoplastic
Base : Polycarbonate
Cover Plate : Polycarbonate
Halogen free : Yes
Surface finishing : Glossy
Face Color : White
RAL-number (similar) : 9003
Environmental Specifications
Suitable for degree of protection (IP) : IP40
Degree of impact strength (IK) : IK04
Operating / Setting Temperature : -5°C to +50°C
Storage temperature : -10°C to +70°C
Product Dimensions
Device width : 45 mm
Device height : 45 mm
Device depth : 41 mm
Built-in depth : 31.5 mm
Standards and Certifications
Standard : AS/NZS 3112 and AS/NZS 3100
IEC Socket Type : IEC Type I
Approvals and Certificates : CE, IMQ, NSW 25352
Cleaning Instructions
Surface cleaning with a cloth.
Do not use : Acetone, Tar Remover, Trichlorethylene
Resistance to the following cleaning agents : Hexane (EN-60669-1), Methylated spirits, Soapy water, diluted ammonia, diluted pure bleach 10%, Glass cleaning substance, Pre-impregnated wipes.
CautionA preliminary test should be carried out if other specific cleaning products are to be used.
Please contact our sales office for additional product information.Sicherheitshinweise
Nur national gültig in Deutschland /
Safety notes only valid in GermanyInstallation nur durch Personen mit einschlägigen elektrotechnischen Kenntnissen und Erfahrungen!*- Durch eine unsachgemäße Installation gefährden Sie:
- Ihr eingenes Leben und das Leben der Nutzer der elektrischen Anlage!
- Mit einer unsachgemäßen Installation riskieren Sie schwere Sachschäden, z.B. durch Brand.
- Es droht für Sie die persönliche Haftung bei Personen- und Sachschäden.
Wenden Sie sich an einen Elektroinstallateur!
* Erforderliche Fachkenntnisse für die Installation
Für die Installation sind insbesondere folgende Fachkenntnisse erforderlich:- Die anzuwendenden "5 Sicherheitsregeln": Freischalten, gegen Wiedereinschalten sichern, Spannungsfreiheit feststellen, Erden und Kurzschließen, benachbarte unter Spannung stehende Teile abdecken oder abschranken
- Auswahl des geeigneten Werkzeuges, der Messgeräte und ggf. der persönlichen Schutzausrüstung
- Auswertung der Messergebnisse
- Auswahl des Elektro-Installationsmaterials zur Sicherstellung der Abschaltbedingungen
- IP-Schutzarten
- Einbau des Elektroinstallationsmaterials
- Art des Versorgungsnetzes (TN-System, IT-System, TT-System) und die daraus folgenden Anschlussbedingungen (klassische Nullung, Schutzerdung, erforderliche Zusatzmaßnahmen etc.).
In der Endanwendung sind folgende Anforderungen der Norm zu prüfen bzw. sicherzustellen
The following requirements of the standard must be checked and respectively ensured at final application:- Schutz gegen elektrischen Schlag / Protection against electric shock
- Aufbau ortsfester Steckdosen und Einbausteckdosen / Construction of fixed socket-outlets
- Temperaturerhöhung / Temperature rise
- Kriechstrecken, Luftstrecken und Abstände durch Vergussmasse und Isolierung / Creepage distances, clearances and distances through sealing compound
GENERAL NOTES
Non stock products are procurement goods, can only be ordered in standard packaging quantities and have a minimum order value. The actual product may differ from the illustration shown. The information provided here is subject to change without notice. The product availability is continuously updated every 15 minutes on working days. The product shown is for the use in the specified country. If no CE reference is included in the product description, the use of this product within the European Union or the CE marking itself is not permitted. The use of non-compliant equipment within the European Union is prohibited by law.
SAFETY NOTES Installation may only be carried by people (qualified electricians) with relevant electrical engineering knowledge and experiences!
DISPOSAL INFORMATION Must not be disposed with household waste!
WEEE No.: DE 54087582 — Information provided in compliance with §18 paragraph 4 sentence 3 WEEE Directive available at
www.bmuv.de