Selected Informations

Contents of this subsection:
  • Australia, Argentina, New Zealand, China, Europe

    Travel Adaptor, Type D121E, Pins CEE 7/7 (Ø 4mm)

  • Australia, New Zealand, Argentina, China

    Molded Adaptor Plugs, Pins Australia/New Zealand AS/NZS 3112, 2-Pole 3-Wire Grounding (2P+E)

  • Australia, New Zealand

    10DWP Series Weatherprotected Power outlet, 10A-250Vac, 15A-250Vac

  • Australia, New Zealand

    2-Conductor Non-Detachable Power Supply Cords, Plugs AS 3112, SAA

  • Australia, New Zealand

    3-Conductor Non-Detachable Power Supply Cords, Plugs AS 3112, SAA

  • Australia, New Zealand

    AQUA LIFE™ and AQUA™ Weatherproof Range Single Powerpoints, Surface Mounting, Sleek and Robust, Residential and Commercial Application Solutions

  • Australia, New Zealand

    AQUA Weatherproof Range Powerpoints, IP53, Surface Mounting, WS53 Series

  • Australia, New Zealand

    Cord Extension Sockets, Rewireable, Model 7P (10A) and 7P15 (15A), 3-Pins Flat (L+N+PE), 240V AC, IEC Type I, Flexible PVC Cover with Safety Skrit, Cord Locking Nut and Screwed Clamp Terminals

  • Australia, New Zealand

    DIN-Rail Mounting Socket Outlets, 10A and 15A or 20A Models, 2.5 Modules Wide (45mm), Provides a General Purpose Power Outlet at the Switchboard

  • Australia, New Zealand

    Deep Surface Mounting Blocks and Boxes, suits Powerpoints, Switches and Electronic Modules, including Weatherproof and Chemically Resistant Versions

  • Australia, New Zealand

    Detachable Power Supply Cordsets, Plug AS/NZS 3112:2000 (2-Pin and 3-Pin Flat Type I), Connectors IEC 60320, SAA Standard

  • Australia, New Zealand

    Double Pole Switched Socket Outlets (Receptacles), Available in single and twin variants, Various versions with 10A or 15A sockets, Classic C2000 Series, Recommended for residential and commercial environments

  • Australia, New Zealand

    Electresafe™ RCD Powerpoint Series (Receptacles, Socket Outlets). It protects against electrocution if a faulty appliance or a live wire is touched, causing current to flow through the body to earth. Electresafe™ RCD offers safety in your home, office, industry or wherever power is consumed from a GPO.

  • Australia, New Zealand

    Extension Socket, 10A or 15A, 250Vac, 3 Pin Flat (A+N+PE), Large Finger Grip, Rigid, Impact Resistant Moulding, Separate Cord Clamp Bar, Cord Guard

  • Australia, New Zealand

    Flexible Cord Extension Socket, 10 Amp or 15 Amp, 250 Volt AC, 3-Pin Flat, 2-Pole 3-Wire Grounding (2P+E), Suitable for 3 core 0.75mm² or 1.0mm² or 1.0mm² ordinary duty flexible cords

  • Australia, New Zealand

    Flexible Plugs, Partial Insulated Active and Neutral Pins, up to Five Color Options, Versions for Ordinary Duty and Heavy Duty or Extra Heavy Duty Cable

  • Australia, New Zealand

    Flush Mounting Socket Outlets and Inlets with Weatherproof Flap IP34, 3-Pins Flat, 2-Pole 3-Wire Grounding (2P+E), 10 and 15 Amp. Versions, 250 Volt AC

  • Australia, New Zealand

    Flush Switches, Available in 1 to 6 Gang Configuration, Horizontal or Vertical mount, Recommended for residential and commercial environments, 2000 Series

  • Australia, New Zealand

    Flush or Panel Mount Socket Outlet, IP 44, with Self-Closing Lid, 10 Amp, 250 Volt AC

  • Australia, New Zealand

    Flush-Mounting Socket Outlets, 10 Amp, 3 Flat Pins, 55 Series

  • Australia, New Zealand

    Heavy Duty Back Entry Plugs and Rewireable Cord Extensions Sockets (Connectors), 10A and 15A, 230V-240V AC (250V max)

  • Australia, New Zealand

    Horizontal Switched Socket Outlets (Receptacles), Available in single and twin variants, Various versions with 10A 15A 20A sockets, Recommended for residential and commercial environments, 2000 Series

  • Australia, New Zealand

    Industrial Plugs and Connectors, 3 to 7 Round Pins, 10 or 16 or 20 Amp, 250 or 500 Volt

  • Australia, New Zealand

    Industrial Switch & Socket Combinations, 10A, 15A, 20A, Quantum Series, AS/NZS 3112

  • Australia, New Zealand

    Large Finger-Grip Plugs, Rigid, Rewirable, Impact-Resistand Moulding, 10 to 25 Amp, 250 Volt AC, 90 Series

  • Australia, New Zealand

    Mains Line Plugs with Grounding Contact, Rewireable, 10 Amp, 250 Volt AC, AS/NZS 3112, 2-Pole 3-Wire Grounding (2P+E), Partial insulated plug pins (Line and Neutral), Straight Cable entry with Strain relief sleeve

  • Australia, New Zealand

    Plug Bases, with Plate Assemblies, 10A, 15A, 20A, 38/1xx-Series

  • Australia, New Zealand

    Plug Tops, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Rewirable, 10 and 15 Amp, 250 Volt AC, 100 Series

  • Australia, New Zealand

    Plug Tops, Low Profile Side Entry with 45° Cord Entry and Screwed Clamp Terminals, 106-Series Plugs (Rewireable), AS/NZS 3112

  • Australia, New Zealand

    Power Outlet Strips (Powerboards), with Overload Protection

  • Australia, New Zealand

    Power Outlet Strips (Powerboards), with Overload Protection, This Section Includes Versions with Surge Protection and Versions with Additional Spacing for Plug-In Transformers

  • Australia, New Zealand

    Quick Connect Plugs, 1439 Series, Transparent Housing, An innovative range of quick connect plug tops in 10A or 15A and 20A in three pin and 10A in four pin confgurations are available

  • Australia, New Zealand

    Rear Connecting Flush Mounting Socket Outlets, 10A and 15A Versions, 3 pin flat and with round Earth, Single Unswitched

  • Australia, New Zealand

    Replacement Accessories Only (Front Plates, Plug Base Mechanism, Screws), Standard AS/NZS 3112, for use with 38-Series Plug Base Mechanism

  • Australia, New Zealand

    Side Entry (Angled) Plugs, 10 Amp and 15 Amp Models, 250 Volt AC, Insulated active and neutral pins ("S" stands for safety), 418S Series

  • Australia, New Zealand

    Side Entry 3-Pin Plugs, 10 Amp or 15 Amp, Complies with AS/NZS3112 and AS/NZS3100, Standard and Hook-Grip 10A Version

  • Australia, New Zealand

    Single Industrial Socket Outlets, 3 Pins Flat, 250 Volt AC, Comply with AS/NZS 3112 and 3123, IP66 conforming to AS 60529, Features Hoseproof and Dust Resistant Transparent Flap with Automatic Snap Catch Latch, Terminals accepts 1.5mm² to 6.0mm²

  • Australia, New Zealand

    Single Powerpoint Mechanisms, Horizontal or Vertical Versions

  • Australia, New Zealand

    Single Powerpoints, DIN Rail Mounting, 240Vac

  • Australia, New Zealand

    Snap-In Modular Socket Outlets, 10 Amp and 10/15 Amp, 240 Volts AC, Modular System (45x45)mm

  • Australia, New Zealand

    Socket Outlets for Panel or Flush Mounting, Round, Versions: 10A 15A 20A 25A, 38-Series Plug Bases (Receptacles), Standard AS/NZS 3112

  • Australia, New Zealand

    Standard Range, Double Powerpoints (Socket Outlets), 10 Amp and 15 Amp, Plate Size: (114x70)mm, Mounting Centres: 84mm, 777 Series

  • Australia, New Zealand

    Standard Range, Single Powerpoints, 10A, 15A, 20A, 25A, 32A, 787-Series

  • Australia, New Zealand

    Surface Mounting Plug Bases, Ideal for Lighting and Dedicated Appliances, 37 Series

  • Australia, New Zealand

    Surface Mounting Socket Outlets (Plug Base Assemblies), 10A to 25A Versions, 250 Volt AC, Standard AS/NZS 3112, Overall Dimensions (121x76x48)mm, Supplied as Plug Base with Plate and Surface Mounting Box

  • Australia, New Zealand

    Switched Socket Outlets, Single and Double, 10 Amp and 15 Amp, Surface and Flush Mounting, Weathershield®

  • Australia, New Zealand

    Telephone/Data & Computer Outlets, Single (1 gang) or Double (2 gang), RJ45 (Cat5E) or RJ12 (Cat3), The expanded range of 6 and 8 contact RJ jacks are designed to fit directly into plates without using an adaptor

  • Australia, New Zealand

    Unswitched or Switched Socket Outlets, with 30mA RCD or without RCD, IP66, 10 Amp or 15 Amp Models, 20 Amp Switched Socket Outlets, 250 Volt AC 1-Phase, 3 Pins Flat

  • Australia, New Zealand

    Wall or Flush Mounting Boxes, Standard size (1-Gang) and double size (2-Gang), Mounting centres: 84mm, Fully insulated, moulded plastic or metallic with knockouts

  • Australia, New Zealand

    Weatherproof Flange Mount Socket Outlet IP54, SAA Standard, suitable for 10 Amp + 15 Amp Plugs, 250 Volt AC max, IEC Type I, AS/NZS 3112

  • Europe

    Molded Adaptor Plugs, Pins CEE 7/7 (France, Belgium, Poland, Germany, etc), 2-Pole 3-Wire Grounding

  • International

    Mounting Enclosures IP66, IEC60529, BS5733

  • International

    Surface Mounting Unswitched Socket Outlets, Weatherproof IP66, Engineering Plastic, Base Color: grey RAL 7035, Cover: smoke-tinted transparent, Nominal Dimensions: (95x95xH97)mm

  • Australia, New Zealand

    Further products in this section non categorized or grouped.