B-I-A Catalog, Part No: 120177 (www.biaonline.com)

B-I-A Vertriebs GmbH
Darmstädter Str. 72-78
D-64354 Reinheim
Germany

Fon: +49 (0) 6162 9148149

eMail: submit your inquiry.

Company contact details

More product information

Technical information

Documentations and Downloads

Further Products and Accessories

Catalog number

340-H2

Description

VORSCHALTGERÄT 25W FÜR (1)F25T12 PREHEAT, UL+CSA, 120V AC, 60Hz

USA, Canada – Electromagnetic Ballast, 120Vac 60Hz, Preheat Start, Low Power Factor, for (1) Linear Fluorescent Lamp F25T12, Reactor Type Circuit, UL (Class P, Indoor and Type 1 Outdoor, HL), CSA

EDP Number

120177

Pack / VPE

40

Brandname

Universal Lighting

unit

Piece

Country of origin

US

Weight (net)

0.331 kg

Customs tariff number

85041020

shipping weight

0.350 kg

Gross volume

stock availability

38 View details… (subject to prior sale)

Please contact our sales office for quantities that are greater than shown above.

GENERAL NOTES

Non stock products have a minimum order quantity. The actual product may differ from the illustration shown. The information provided here is subject to change without notice. The product availability is continuously updated every 15 minutes on working days. The product shown is for the use in the specified country. If no CE reference is included in the product description, the use of this product within the European Union or the CE marking itself is not permitted. The use of non-compliant equipment within the European Union is prohibited by law.

SAFETY NOTES
Installation may only be carried by people (qualified electricians) with relevant electrical engineering knowledge and experiences!

DISPOSAL INFORMATION Must not be disposed with household waste!
WEEE No.: DE 54087582 — Information provided in compliance with §18 paragraph 4 sentence 3 WEEE Directive available at www.bmuv.de

Printer friendly preview…

HELP: Graphical snapshot…

Show Corresponding graphic only…

Technical Information 120177 Sourced from www.biaonline.com

Application and Performance Specifications

Catalog No: 340-H2

•	Description: Electromagnetic ballast for (1) fluorescent lamp as indicated below:

•	Line Voltage: 120 Volt AC, +5%, -10%, 60Hz

•	Rapid Start

•	Low Power Factor

•	Manufactured in North America

Typical Performance Data

Lamp Type	Lamp No.	Input Current (Amps)	Input Power (Watts)	Power Factor	Ballast Factor	Ballast Efficacy Factor	T.H.D. %	Crest Factor
F25T12*	1	0.42	29	< 0.60	0.90	3.10	< 10	< 1.7

Application and Performance Specification Information Subject to Change without Notification.

*Primary lamp type

Performance

•	Designed in accordance with ANSI C82.1

•	Compatible with PLC and IR systems

•	Reactor type circuit

Application

•	Minimum Starting Temperature: 50�F (10�C)

•	Maximum Ballast Case Temperature not to exceed 90�C

•	Sound Rated: A

•	Remote Mounting: 20 feet with minimum 18 AWG (refer to TechNote #7b for other wire sizes/lengths)

Safety

•

No PCB′s

•	UL listed (Class P, Indoor and Type 1 Outdoor, HL)

•	CSA Certified

Mechanical

•	Overall Length (L): 3 1/16" (77.8 mm)

•	Mounting (M): 2 3/4" (69.9 mm)

•	Width (W): 1 25/32" (45.2 mm)

•	Height (H): 1.5" (38.1 mm)

•	Lead Length ± 1" (± 25.4 mm) Black 12" (304.8 mm) Black 22" (558.8 mm)

•	Weight: 0.70 lbs (0.319 kg)

Warranty

The manufacturer warrants to the purchaser that each ballast will be free from defects in material or workmanship for a period of 24 months from date of manufacture when properly installed and under normal conditions of use.

Ballast must be grounded. Install in accordance with National Electric Code.

Specifications and information are nominal and are subject to change without notice.

Printer friendly preview…

HELP: Graphical snapshot…

Show Corresponding graphic only…

Product Information 100181Sourced from www.biaonline.com

Appropriate Catalog Subsections

Technical Informations, Glossary and Definitions

Electromagnetic, electronic, dimmable, HID, Sign, Compact fluorescent ballasts

Electromagnetic Preheat Ballasts

Preheat Ballasts

•	These units are designed for use with general fluorescent lamps and require the use of starters.

•	These ballasts deliver an opencircuit voltage high enough to activate the starter to preheat lamp filaments to a temperature approximately 1750� F.

•	After a few seconds, the starter opens the filament circuit.

•	This provides an additional power surge to enable an electric arc to strike through the lamp and ignite it.

•	Lamp current is then limited by the ballast to an operating level proper for the lamp.

•	UL-approved Class P ballasts comply with the National Electrical Code requirement and are equipped with an automatic resetting thermal protector, built-in and adjacent to the transformer coils.

Typical Specifications for Electromagnetic Ballasts

•	Ballasts shall be CBM certified energy saving magnetic type and operate lamps at a frequency of 60 Hz.

•	Ballasts shall be specifically designed to operate (Quantity & Type) lamps.

•	Ballasts shall operate from 60 Hz input source of _____ volts, and tolerate sustained variations of +5%-10% with no damage to the ballasts.

•	Ballasts shall provide transient immunity as specified by ANSI C62.41-1991, Location Category A1.

•	Ballasts shall provide starting sequence consistent with ANSI standard C82.1.

•	Ballasts shall tolerate sustained open circuit and short circuit output conditions with no damage to the ballasts.

•	Ballasts shall be: • UL listed as Class P, and for use in indoor or Type 1 outdoor applications. • CSA certified where applicable (120 and 347 volt models).

•	Ballasts shall tolerate operation, in most fixtures, at ambient temperatures up to 105�F (40�C). Ballast enclosure is limited to 90�C maximum temperature.

•	Ballasts shall have Power Factor greater than .90.

•	Lamp Current Crest Factor (ratio of peak to RMS lamp current) shall be 1.7 or less in accordance with lamp manufacturers recommendation and ANSI C82.1.

•	Ballasts shall have a Ballast Factor greater than .925 per ANSI C82.1.

•	Input current Total Harmonic Distortion shall not exceed .32 per ANSI C82.1.

•	Ballasts shall be fully encapsulated (potted) to ensure maximum thermal and structural integrity.

Products

Catalog No.	Voltage	Lamp Types	Stock
4104P	120Vac 60Hz	(1) CFT9W/G23 or CFQ9W/G23 or CFT7W/G23	49


549-H2	120Vac 60Hz	(1) F6T5 or F8T5	42
412-L-SLH-TC-P	120Vac 60Hz	(1) F40T12ES, F40T12 or F40T10	41
446-L-SLH-TC-P	120Vac 60Hz	(2) F40T12ES, F40T12ES/U, F40T12/U, F40T12 or F40T10	39
200-H2	120Vac 60Hz	(1) F20T12, F19T8, F18T8, F15T8, F15T12, F14T8 or F14T12	117
340-H2	120Vac 60Hz	(1) F25T12	38
202-B-TC-P	120Vac 60Hz	(1) F40T12ES, FC12T9, F40T12, F40T10, F30T8, F30T12 or F282D/GR8	39
205-TC-P	120Vac 60Hz	(2) F40T12ES, F40T12ES/U, F40T12 or F40T10	13
754-L-TC-P	220Vac 50Hz	(2) F40T12, F40T12ES or F40T10	3
F213ESP	120Vac 60Hz	(2) F13T5, (2) F8T5 or (1) F13T5 & (1) F8T5	30

Fluorescent Lamps, and Starters for Fluorescent Lamps

Learn More…

Specifications and information are nominal and are subject to change without notice.

Representative images and Product infos. (Click the image or the reference no. for more information.)

Click the picture left or the reference no. below for more information.
13889
STARTER FS-25, 25W, 22W CIRCLINE FLUORESCENT STARTER FÜR LEUCHTRÖHREN, UL/CSA
USA, Canada – Fluorescent Starter for use with FC6 (20W) and FC8 (22W) Circline Lamps when operated by Preheat Ballasts, F25 and F18T8 Preheat Lamps, UL/CSA FS-25
stock item, subject to prior sale