|
|
|
| USA, Canada |
|
|
|
|
|
|
| Features and Specifications |
|
| INTENDED USE — An attractive and energy-efficient surface-mounted or suspended linear fluorescent luminaire, suitable for wet, damp locations. Ideal for challenging situations where relatively low fixture mounting heights and wide fixture spacings are common — such as parking garages, industrial facilities, retail malls, multi-purpose centers and airports. Certain airborne contaminants can diminish integrity of plastics. |
|
| CONSTRUCTION — Shallow one-piece 5VA fiberglass housing with integral perimeter channel utilizing continuous poured-in-place closed cell gasket. UL approved as a wireway and through wiring. Tool-less ballast and wiring access. Power connection is easily accommodated through pre-drilled holes at each end. Wet location plugs provided for maximum flexibility. Captive stainless steel latches are standard. Polycarbonate latches are optional. |
|
| OPTICS — Blow-molded UV stabilized polycarbonate diffuser with lineal ribs is standard for 2′ (609.6mm) and 4′ (1219.2mm) fixtures. Injection-molded impact-resistant acrylic lens with lineal ribs is standard for 8′ (2438.4mm) fixtures. Optically clear deep acrylic lens (3.5" deep available for 4′ and 8′) also available. Additional lens options available. Deep lens standard with lens tether for ease of maintenance. White ballast cover has polyester powder coat finish. |
| Factory-installed lamps are available in various temperature colors and rated life. Lamps are secured with rotary locking lamp holders for ease of relamping and to provide a more secure lamp seating. Wall mounting; horizontal orientation only for use in damp locations. |
|
| ELECTRICAL — All standard ballasts are electronic, energy saving, thermally protected, Class-P, HPF, non-PCB, Sound Rated A, UL/CSA certified where applicable. Lamp and ballast configurations in adjacent chart. |
|
| INSTALLATION — May be ceiling mounted or suspended by chain, cable or threaded rod. Stainless steel mounting brackets included (two per luminaire), pre-punched for easy field-attachment of bolts, screws and other mounting hardware. Covered ceiling not required to maintain wet location listing or IP rating. Not recommended for use in above 40°C when suspended; 35°C when surface mounted. When dimming ballast is used ambient temperature is 25°C. |
|
| LISTINGS — The FEM fixture is UL and cUL listed (File E77235, Fluorescent Surface-mounted Luminaires). This fixture is suitable for wet locations. NSF splash zone certified. Meets FDA/USDA guidelines for shielding around exposed food. IP65, IP66 and IP67 rated. 2′ (609.6mm) model IP65 only. |
|
| Actual performance may differ as a result of end-user environment and application. |
|
| Note: Specifications subject to change without notice. |
|
|
| Configurations |
| Series |
# of Lamps |
Lamp Type |
Width |
Depth |
Length |
| FEM2 |
1, 2 |
17, 14T5, 24T5HO |
7" (178) |
4-3/4" (121) |
28" (717) |
| FEM2 |
3 |
17 |
7" (178) |
4-3/4" (121) |
28" (717) |
| FEM4 |
1, 2 |
28T5, 32, 54T5HO |
7" (178) |
4-3/4" (121) |
52" (1321) |
| FEM4 |
3 |
32 |
7" (178) |
4-3/4" (121) |
52" (1321) |
| FEM4 (w/IMACD or IMAFD lens) |
1, 2 |
28T5, 32, 54T5HO |
7" (178) |
6-1/8" (155) |
52" (1321) |
| FEM4 (w/IMACD or IMAFD lens) |
3 |
32 |
7" (178) |
4-3/4" (121) |
52" (1321) |
| FEM8 |
1, 2 |
28T5, 32, 54T5HO |
7" (178) |
4-3/4" (121) |
100-1/4" (2546) |
| FEM8 |
3 |
32 |
7" (178) |
4-3/4" (121) |
100-1/4" (2546) |
| FEM8 (w/IMACD or IMAFD lens) |
1, 2 |
28T5, 32, 54T5HO |
7" (178) |
6-1/8" (155) |
100-1/4" (2546) |
| FEM8 (w/IMACD or IMAFD lens) |
3 |
32 |
7" (178) |
6-1/8" (155) |
100-1/4" (2546) |
|
| All dimensions are shown in inches (mm) unless otherwise noted. |
| Note: Adding a cord set or wet location fitting to the end of the fixture will add 1" (25.4mm) to the overall length. |
|
|
|
|
|
Specifications and information are nominal and are subject to change without notice.
