USA |
Rev. 022817 |
|
|
|
|
|
Features & Specifications |
|
Intended Use |
Combination emergency lighting unit and exit. Suitable for illuminating the path of egress and for marking the means of egress in accordance with Life Safety Code NFPA 101. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate. Contact our sales office for Acrylic-Polycarbonate Compatibility table for suitable uses. |
|
Construction |
Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components for easy installation. Universal J-box pattern. Universal chevrons are easily removed for directional indication. Fully assembled single face with extra faceplate for easy field-conversion to double face. Track and swivel arrangement permits full range of lamp adjustment. Letters 6" (152.4mm) high with 3/4" (19.1mm) stroke, with 100 ft (30.5m) viewing distance rating, based on UL924 standards. |
|
Optics |
The typical life of the LED lamp is 10 years. Two 1W LED lamps for emergency light. |
|
Electrical |
Dual-voltage input 120V or 277V AC; 9.6V output. Emergency combo provided with test switch, status indicator and rechargeable battery. Maintenance-free nickel-cadmium battery provides 90 minutes of emergency power. High output (HO) option provides up to 3W of LED remote capacity. |
|
Installation |
Top, back or end mounting capability (canopy included). |
|
Listings |
UL Listed (File E71446). Meets UL 924, NFPA 101, NFPA 70-NEC and OSHA illumination standards. Indoor damp location 32°F to 122°F (0°C to 50°C) listed standard. |
|
All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties. |
|
NOTE: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25°C. Specifications subject to change without notice. |
|
|
Ordering Information |
Description |
Catalog Number |
Supply Voltage |
Input Wattage |
Pallet Qty. / Standard Carton Qty. |
Red |
|
120V or 277V |
3.8 |
108/6 |
Green |
|
120V or 277V |
3.2 |
108/6 |
Red, high output |
ECR-LED-HO-M6 |
120V or 277V |
3.8 |
108/6 |
Green, high output |
ECG-LED-HO-M6 |
120V or 277V |
3.2 |
108/6 |
Accessories: Order as separate catalog number. |
Wireguard (back mount only) (1) |
ELA-WG3 |
|
|
|
Single remote lamp (2,3) |
ELA-LED-M12 |
|
|
|
Double remote lamp (2,3) |
ELA-LED-T-M12 |
|
|
|
Single, weather-proof remote lamp (2,3) |
ELA-LED-WP-M12 |
|
|
|
Double, weather-proof remote lamp (2,3) |
ELA-LED-T-WP-M12 |
|
|
|
|
Catalog numbers in bold indicates active products in this group. Contact our sales office for the others. |
|
Notes Contact our sales office. (1) See spec sheet ELA-WG. (2) See spec sheet LED-Remote Lamps. (3) Only available with HO option. |
|
Specifications and information are nominal and are subject to change without notice.