Catalog No. : WPB23
EDP Number : 123611
Target Countries : USA, Canada
Description :
Single Gang Weatherproof Box, 3 Hole 1/2" Threaded Outlets (1 Hole Each End, 1 Hole in Back), Die Cast Aluminum, 18.5 Cubic Inches UL/cUL and CSA Listed, Painted Color: Gray
Country of origin : IN – INDIA
Taric Number : 76169990
Subject to change
Brandname : Pass and Seymour
Logistic Informations
Standard qty. : 2772 Each
Carton quantity (VPE) : 12 Each
Shipping weight : 0.290 kg / Each
Gross volume : 0.630 m³ / 1000
Net weight : 0.241 kg / Each
Product Features
Threaded Holes : 3 Hole 1/2"
(1 Hole Each End, 1 Hole in Back)
Volume : 18.5 Cu. In.
Painting Color : Gray
Product Name : Weatherproof Single Gang Box
Certifications and Compliance
USA : UL/cUL Listed Outlet Box 22F0 (File E143223)
NEMA : 3R Rated
Canada : CSA C22.2 No. 18
RoHS status : Compliant
WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Applications
- For use in branch circuit wiring in wet, damp, or dry locations.
- Field Uses: Industrial, Health Care, Education, Institutional, Retail, Office, Hospitality/Lodging, Multiple Dwelling.
Product Range Description
- Heavy die-cast aluminum construction, reinforced threaded connector outlets.
- Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
- Installation instructions, two closure plugs, grounding screw, two mounting lugs with screws furnished with all boxes.
- UL/cUL Listed for wet and/or damp locations with appropriate cover.
- Designed for both interior and exterior applications.
- Hubs accept all threaded fittings and threaded conduit.
- Internal threads on hubs comply with NEMA requirements.
- Will accept standard 4 screw mounting covers and single gang weatherproof covers.
- Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
- Additional boxes with a wide range of sizes, depths, colors, and gangs are available.
General Instructions
Caution: Turn off power before installing.
- Attach mounting lugs to the box using screws for wall mount.
- Pull power supply wires into the box securing with appropriate fitting.
- Attach ground wire to the box with the green ground screw.
- Close all remaining holes with enclosed plugs.
- Connect switch, receptacle or cover to the outlet box.
- Seal all openings and use gaskets as required to comply with wet location installation.
- Installation must comply with local electrical codes.