Product availability
Contact our sales office to get additional information
Catalog No. : CK200-2-236305
EDP Number : 130670
Target Countries : USA, Canada
Description :
Electric Fan Heater, 2000W 240V 60Hz 8.3A (6824 Btu/hr) or 1800W 208V 60Hz 8.7A (6142 Btu/hr), Temperature range 45-95°F (7-35°C), Surface Wall Mount, cETLus Mark
Country of origin : DE 03
Taric Number : 85162991
Subject to change
Brandname : Vendor approved
Technical Information
Logistic Informations
Standard qty. : 30 Each
Carton quantity (VPE) : 10 Each
Shipping weight : 6.550 kg / Each
Gross volume : 32.670 m³ / 1000
Net weight : 2.700 kg / Each
Technical Specifications
Rated Voltage : 240 V AC or 208 V AC
Wattage : 2000 W or 1800 W
Rated Current : 8.3 Amp or 8.7 Amp
Rated Output : 6824 Btu/hr (2.0 kW) or 6142 Btu/hr (1.8 kW)
Room size estimate : 200 sq.ft. (18.6 m²)
Frequency : 60 Hz
Phase : Single Phase
Air volume : 70.6 CFM (119.95 m³/hr)
Recommended circuit breaker size : 15 Amp (This is a recommendation from the manufacturer. Check local codes for compliance if necessary.)
Minimum wire size (copper) : 14 AWG
Heating element : Ceramic positive temperature coefficient (PTC)
Thermostat and high limit : Bimetal Type
Motor : 20 W shaded pole
Blower : Glass-Reinforced Polycarbonate, Radial Type
Dimensions : H 15-3/4" (400 mm) x W 10-7/8" (275 mm) x D 5-1/8" (131 mm)
Housing : ABS Plastic
Temperature range : 45°F to 95°F (7°C to 35°C)
Frost protection setting : 45°F (7°C)
Operating noise : 49.0 dB(a)
Product Features
CK Trend wall-mounted electric heaters are designed for installation where quick heat is needed, such as bathrooms, kitchens, bedrooms, hallways, playrooms and garages in new construction and renovation projects. They have an ultra-quiet fan and will replace existing recess-mount heaters. A built-in thermostat has a frost protection setting.
They are an elegant and simple solution to add supplemental heat to a room that may not get quite enough heat from a central source, such as a room not receiving enough heat from a mini-split retrofit.
Certifications and Compliance
USA : Certified to ANSI/UL Std. 2021
Canada : Conforms to CAN/CSA Standard 22.2 No. 46
Intertek : cETLus Listed
Contractor shall supply and install CK Trend electric fan heater(s) of the wattage and voltage specified on the plan. Heater(s) shall be surface-mounted fan type, with an operating noise of 49 dB(a). Heater(s) shall have a body in Alpine White color. Heater(s) shall have a selectable temperature range of 45°F to 95°F (7°C to 35°C), and a frost protection setting which switches on the heating element automatically if the room temperature drops below the frost protection temperature of 45°F (7°C). Heater(s) shall be mounted with a minimum clearance from the finished floor of (6-8" recommended) at least 4", a minimum clearance from the left and right sides of the heater of at least 4", a minimum clearance from the top of the heater of at least 12", and a minimum clearance to the back of the heater of at least 1". Heater(s) shall be ETL listed to conform to ANSI/UL Std. 2021 and certified to CAN/CSA C22.2 No. 46.
Please contact our sales office for additional product information.