Catalog No. : WPB25
EDP Number : 131087
Target Countries : USA, Canada
Description :
Single Gang Weatherproof Box, 5 Hole 1/2" Threaded Outlets (2 Holes Each End, 1 Hole in Back), Die Cast Aluminum, 17.0 Cubic Inches UL/cUL and CSA Listed, Painted Color: Gray
Country of origin : IN – INDIA
Taric Number : 76169990
Subject to change
Brandname : Pass and Seymour
Logistic Informations
Standard qty. : 2352 Each
Carton quantity (VPE) : 12 Each
Shipping weight : 0.310 kg / Each
Gross volume : 0.630 m³ / 1000
Net weight : 0.252 kg / Each
Product Features
Threaded Holes : 5 Hole 1/2"
(2 Holes Each End, 1 Hole in Back)
Volume : 17.0 Cu. In.
Painting Color : Gray
Product Name : Weatherproof Single Gang Box
Certifications and Compliance
USA : UL/cUL Listed Outlet Box 22F0 (File E143223)
NEMA : 3R Rated
Canada : CSA C22.2 No. 18
RoHS status : Compliant
WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Applications
- For use in branch circuit wiring in wet, damp, or dry locations.
- Field Uses: Industrial, Health Care, Education, Institutional, Retail, Office, Hospitality/Lodging, Multiple Dwelling.
Product Range Description
- Heavy die-cast aluminum construction, reinforced threaded connector outlets.
- Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
- Installation instructions, two closure plugs, grounding screw, two mounting lugs with screws furnished with all boxes.
- UL/cUL Listed for wet and/or damp locations with appropriate cover.
- Designed for both interior and exterior applications.
- Hubs accept all threaded fittings and threaded conduit.
- Internal threads on hubs comply with NEMA requirements.
- Will accept standard 4 screw mounting covers and single gang weatherproof covers.
- Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
- Additional boxes with a wide range of sizes, depths, colors, and gangs are available.
General Instructions
Caution: Turn off power before installing.
- Attach mounting lugs to the box using screws for wall mount.
- Pull power supply wires into the box securing with appropriate fitting.
- Attach ground wire to the box with the green ground screw.
- Close all remaining holes with enclosed plugs.
- Connect switch, receptacle or cover to the outlet box.
- Seal all openings and use gaskets as required to comply with wet location installation.
- Installation must comply with local electrical codes.
Sicherheitshinweise
Nur national gültig in Deutschland /
Safety notes only valid in GermanyInstallation nur durch Personen mit einschlägigen elektrotechnischen Kenntnissen und Erfahrungen!*- Durch eine unsachgemäße Installation gefährden Sie:
- Ihr eingenes Leben und das Leben der Nutzer der elektrischen Anlage!
- Mit einer unsachgemäßen Installation riskieren Sie schwere Sachschäden, z.B. durch Brand.
- Es droht für Sie die persönliche Haftung bei Personen- und Sachschäden.
Wenden Sie sich an einen Elektroinstallateur!
* Erforderliche Fachkenntnisse für die Installation
Für die Installation sind insbesondere folgende Fachkenntnisse erforderlich:- Die anzuwendenden "5 Sicherheitsregeln": Freischalten, gegen Wiedereinschalten sichern, Spannungsfreiheit feststellen, Erden und Kurzschließen, benachbarte unter Spannung stehende Teile abdecken oder abschranken
- Auswahl des geeigneten Werkzeuges, der Messgeräte und ggf. der persönlichen Schutzausrüstung
- Auswertung der Messergebnisse
- Auswahl des Elektro-Installationsmaterials zur Sicherstellung der Abschaltbedingungen
- IP-Schutzarten
- Einbau des Elektroinstallationsmaterials
- Art des Versorgungsnetzes (TN-System, IT-System, TT-System) und die daraus folgenden Anschlussbedingungen (klassische Nullung, Schutzerdung, erforderliche Zusatzmaßnahmen etc.).
In der Endanwendung sind folgende Anforderungen der Norm zu prüfen bzw. sicherzustellen
The following requirements of the standard must be checked and respectively ensured at final application:- Schutz gegen elektrischen Schlag / Protection against electric shock
- Aufbau ortsfester Steckdosen und Einbausteckdosen / Construction of fixed socket-outlets
- Temperaturerhöhung / Temperature rise
- Kriechstrecken, Luftstrecken und Abstände durch Vergussmasse und Isolierung / Creepage distances, clearances and distances through sealing compound