USA, Canada, Mexico |
Rev 02/21/2014 |
|
|
|
|
|
|
Extra Duty While-In-Use Covers |
|
The Extra Duty While-in-Use Covers are ruggedly constructed to protect from moisture, debris and insects, while providing easy access to receptacles. These non-metallic covers are available in both vertical and horizontal configurations for a secure fit and neat appearance when mounted. The UV resistant polycarbonate cover and base protect wiring devices from the elements without breaking, cracking or discoloration. Stainless steel hinge pins offer added strength and resistance to the rigors of daily use. |
|
The Extra Duty While-in-Use Covers are available in solid Gray or Clear with a gray base. They are ideal for use with lawn equipment, pools, hot tubs, holiday and landscape lighting, outdoor entertainment systems, barbeques, fountains, vending machines and other outdoor electrical applications. |
|
Extra Duty While-in-Use Covers are built to withstand the elements and feature: |
• | Compliance with NEC® 2014 Section 406.9(B)(1) for "Extra Duty" applications hoods* |
|
• | Standard opening accommodates Decora® GFCI devices and additional adapter plates are included for duplex and single receptacle openings |
|
• | Pre-mounted heavy-duty gasket provides a weather-resistant seal which protects from moisture and adds to ease of installation |
|
• | Includes two inserts to cover the circular cord openings to prevent insects and debris from entering the cover while not in use |
|
|
• | Meets UL 50E Rainproof requirements |
|
|
• | c(UL)us listed cover 262B (File E13397), NOM 057 |
|
|
|
Ordering Information |
Catalog Number |
Item Description |
Configuration Orientation |
Lid Color |
Stock
|
|
While in Use Cover for GFCI/Decora, Duplex & Single Receptacle |
Vertical |
Clear |
10 |
|
While in Use Cover for GFCI/Decora, Duplex & Single Receptacle |
Vertical |
Gray |
|
|
While in Use Cover for GFCI/Decora, Duplex & Single Receptacle |
Horizontal |
Clear |
10 |
|
While in Use Cover for GFCI/Decora, Duplex & Single Receptacle |
Horizontal |
Gray |
|
|
NOTE: Non stock products have a minimum order quantity. |
|
|
|
* 406.9 Receptacles in Damp or Wet Locations (B) Wet Locations (1) Receptacles of 15 and 20 Amperes in Wet Location. Receptacles of 15 and 20 amperes installed in a wet location shall have an enclosure that is weatherproof whether or not the attachment plug cap is inserted. An outlet box hood installed for this purpose shall be listed and shall be identified as "extra duty". All 15- and 20-ampere, 125- and 250-volt nonlocking-type receptacles shall be listed weather-resistant type. |
|
|
|
|
Dimensions — Nominal: inch [mm] |
|
|
|
|
|
|
|
MOUNTING INSTRUCTIONS |
|
Extra Duty "While In-Use" Cover for Decora®/GFCI, Duplex and Single Receptacle |
|
|
|
|
|
For Outdoor Use |
|
Protects outdoor outlets against weather – even with plugs inserted |
|
|
Product Features |
• | Protects outlets against weather with or without plugs inserted |
|
• | Sealing gasket attached to cover′s back for easier installation |
|
|
• | Meets UL 50E Rainproof requirements |
|
|
• | Reinforced Stainless steel hinge |
|
• | Complies with NEC® 2014 Section 406.9(B)(1) for "Extra Duty" applications hoods |
|
|
NOTE: The Rainproof "While-in-Use" Cover is designed for installation over smooth, flat surfaces (metal or vinyl siding, clapboard, plywood, etc.). AVOID mounting over surface irregularities (joints, gaps, protrusions, etc.) which could disrupt the continuity of the seal. If the mounting surface is NOT smooth, use silicone sealant to ensure proper sealing. |
|
|
TO INSTALL |
|
WARNING: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE INSTALLING! |
1. Remove the existing wallplate and all screws. |
2. Select proper insert for receptacle/switch being used. |
3. Place insert into back of product, making sure the lettering "this side faces wall" is on the side that will face the wall during installation. Ensure insert is in proper position (see illustration). |
4. Insert plastic hole plugs (provided) into unused wire exit slots. |
5. Clean wall surface that will mate with base. |
6. Apply sealant if wall surface is rough. |
7. Align the unit against the outdoor junction box with existing matching holes. Insert screws (provided) and tighten firmly. |
8. Close cover to latch. Restore power at circuit breaker or fuse. Installation is complete. |
|
|
|
|
|
Specifications and information are nominal and are subject to change without notice.