Single or Duplex Socket Outlets, Switch/Socket Combinations |
|
|
|
|
|
Coverplates and mechanisms of the "Habitat" series have a velvety surface with a special treatment that allows greater resistance to ultraviolet rays, in order to ensure the uniform color of the assemblies. The "Habitat" series includes 1-gang (4" x 2") and 2-gang (4" x 4") versions, enable dynamism in choosing the best solution for each project. 2-gang versions are available on special request, and subject to minimum order quantities. |
|
The "Habitat" system provides everything you expect from electrical wiring devices |
• | Suitable for flush mounting or panel mount |
|
• | More technology, exclusivity, and installation flexibility |
|
• | Sophistication, smooth surface and beauty for all projects |
|
• | Terminals with an unique wire cage fixing |
|
• | Manual removal of mechanisms from front or rear |
|
• | Higher latches fits and finish coverplate perfectly |
|
• | Coverplate and mechanisms have same finish |
|
|
Specifications |
• | Rated Voltage: 250 Volt AC |
|
• | Rated Current: 10 Amp. or 20 Amp. |
|
• | 2-pole 3-wire grounded (2P+E) |
|
• Applicable standard: Brazil ABNT NBR NM 60884-1, ABNT NBR NM 60669-1, NBR 14136Learn More… |
Brazil standard NBR 14136 |
was developed on the basis of the standard IEC 60906-1. The Class I and II plug shapes are similar to the europlugs. The front profile is also a flat hexagon, but it is slightly thicker. Plug looks remarkably similar to the Swiss SEV 1011 plug, but grounding pin of Swiss plug is 5 mm away from the center line. Both hexagons of brazilian plug are 35.5mm wide. The hexagon of the 3-pin Class I plugs is 17 mm high, whereas the hexagon of the 2-pin Class II plugs with only 14 mm is slightly slimmer. Europlugs are only 0.3 mm smaller. |
|
|
|
Dimensions (view of plug pins) |
|
|
Dimensions are nominal in mm. |
|
|
|
Plugs and sockets |
Brazil standard NBR 14136 includes two types of plugs and socket outlets: 10 Amp with a pin diameter of 4.0 mm, and 20 Amp with a pin diameter of 4.8 mm. Plugs and sockets for equipment Class I (2-pole 3-wire grounded, 2P+E) and equipment Class II (2-pole 2-wire non grounded, 2-POL) are available. |
|
|
|
• | Nominal Coverplate Size: 4" x 2" or 4" x 4" for 1 to 6 modular mechanisms |
|
|
Compliance |
INMETRO OCP-0004 |
|
|
These devices are supplied as complete units consisting of module support frame for flush mount or panel mount, Coverplate, and socket outlet, switch or combination. |
|
|
|
|
Coverplate Size (118x78)mm, 1-Gang, Socket outlets and Switch/Socket Combinations, Flush mounting |
Catalog No. |
Rated Current |
Description |
Pin Ø |
Stock |
|
10 Amp |
Single Socket Outlet, NBR 14136, White |
4.0 mm |
|
|
10 Amp |
Duplex Socket Outlet, NBR 14136, White |
4.0 mm |
|
|
10 Amp |
Combination 1-pole one-way switch/Receptacle, NBR 14136, White |
4.0 mm |
22 |
|
10 Amp |
Combination 1-pole 3-way switch/Receptacle, NBR 14136, White |
4.0 mm |
|
|
|
|
|
|
|
|
|
|
|
|
20 Amp |
Single Socket Outlet, NBR 14136, White |
4.8 mm |
21 |
|
20 Amp |
Duplex Socket Outlet, NBR 14136, White |
4.8 mm |
17 |
|
20 Amp |
Combination 1-pole one-way switch/Receptacle, NBR 14136, White |
4.8 mm |
22 |
|
20 Amp |
Combination 1-pole 3-way switch/Receptacle, NBR 14136, White |
4.8 mm |
22 |
|
Non stock products have a minimum order quantity. |
|
|
|
|
|
Further products and 2-gang versions are available on special request, and subject to minimum order quantities. |
|
|
|
|
|
|
|
Further Products of this Series (supplied as single parts), and suitable Flush Mounting Box |
Catalog No. |
Description |
Nominal Dimensions |
Overall Dims. (mm) |
Stock |
Socket Outlets are available as Single Parts |
|
Socket Outlet Module, 2P+E, 10A/250V, White Cover |
— |
43.1 x 21.5 x D 43.5 |
91 |
|
Socket Outlet Module, 2P+E, 10A/250V, Red Cover |
— |
43.1 x 21.5 x D 43.5 |
|
|
Socket Outlet Module, 2P+E, 20A/250V, White Cover |
— |
43.1 x 21.5 x D 43.5 |
102 |
|
Socket Outlet Module, 2P+E, 20A/250V, Red Cover |
— |
43.1 x 21.5 x D 43.5 |
|
|
|
|
|
|
|
|
|
|
|
|
Coverplate for Support Frame (Horizontal), 1 Module, White |
4" x 2" |
118 x 78 x D 9 |
190 |
|
Module Support Frame (Horizontal), 1 to 3 Modules, Black |
4" x 2" |
117 x 72 x D 22 |
90 |
|
Module Support Frame (Horizontal), 1 to 3 Modules, White |
4" x 2" |
117 x 72 x D 22 |
100 |
|
|
|
|
|
|
|
|
|
|
Masonry Flush Mounting Boxes |
|
1-Gang Rectangular Masonry Flush Mounting Box |
4" x 2" x D 50mm |
112 x 74 x D 52 |
381 |
|
2-Gang Rectangular Masonry Flush Mounting Box |
4" x 4" x D 50mm |
112 x 112 x D 52 |
|
|
Non stock products have a minimum order quantity. |
|
|
|
|
|
|
|
|
|
| Coverplate Size (91x56.5)mm, Socket outlets and Switch/Socket Combinations, Surface mounting |
Catalog No. |
Description |
Stock |
|
10 Amp, Single Socket Outlet, NBR 14136, Pin Ø 4.0 mm, White |
95 |
|
10 Amp, Duplex Socket Outlet, NBR 14136, Pin Ø 4.0 mm, White |
|
|
10 Amp, Combination 1-pole one-way switch/Receptacle, NBR 14136, Pin Ø 4.0 mm, White |
80 |
|
10 Amp, Combination 1-pole 3-way switch/Receptacle, NBR 14136, Pin Ø 4.0 mm, White |
60 |
|
20 Amp, Single Socket Outlet, NBR 14136, Pin Ø 4.80 mm, White |
|
|
20 Amp, Duplex Socket Outlet, NBR 14136, Pin Ø 4.80 mm, White |
11 |
|
20 Amp, Combination 1-pole one-way switch/Receptacle, NBR 14136, Pin Ø 4.80 mm, White |
|
|
20 Amp, Combination 1-pole 3-way switch/Receptacle, NBR 14136, Pin Ø 4.80 mm, White |
|
|
Surface Mounting Box (Empty), Thermoplastic White, Nominal Dimensions: (91 x 56.5 x H40)mm |
175 |
|
Blank Coverplate, Thermoplastic White, used with Cat.No. 0934-WH (for junction box applications) |
|
|
|
|
|
|
|
Complete units, supplied with Catalog No. 0934-WH surface mounting box: |
|
10 Amp, Single Socket Outlet, NBR 14136, Pin Ø 4.0 mm, White |
343 |
|
10 Amp, Combination 1-pole one-way switch/Receptacle, NBR 14136, Pin Ø 4.0 mm, White |
|
|
20 Amp, Single Socket Outlet, NBR 14136, Pin Ø 4.8 mm, White |
91 |
|
20 Amp, Combination 1-pole one-way switch/Receptacle, NBR 14136, Pin Ø 4.8 mm, White |
|
|
Non stock products have a minimum order quantity. |
|
|
|
|
|
|
|
| 10 Amp, Selection of popular products |
Product image |
Catalog No. and Description |
Stock |
|
Angled power plug, rewirable, 10A/250V, Brazil NBR 14136, 2P+E, Pin Ø 4.0mm, black |
185 |
|
Power plug, rewirable, 10A/250V, Brazil NBR 14136, 2P+E, Pin Ø 4.0mm, light grey |
1 |
|
Power plug, rewirable, 10A/250V, Brazil NBR 14136, 2P+E, Pin Ø 4.0mm, black |
1165 |
|
Single socket outlet, 10A/250V, Brazil NBR 14136, 2P+E, Surface Mounting, white |
1 |
|
Power supply cordset, Length 1.8m, Brazil Plug Nr. YP-04 (10A, NBR 14136), 2P+E, Pin Ø 4.0mm, Rated current 10A, 250V, H05VV-F3G0.75mm², Appliance Connector Nr. YC-12 (IEC60320/C13), black |
5 |
|
Non stock products have a minimum order quantity. |
|
|
|
|
|
|
|
| 20 Amp, Selection of popular products |
Product image |
Catalog No. and Description |
Stock |
|
Angled power plug, rewirable, 20A/250V, Brazil NBR 14136, 2P+E, Pin Ø 4.8mm, light grey |
280 |
|
Angled power plug, rewirable, 20A/250V, Brazil NBR 14136, 2P+E, Pin Ø 4.8mm, black |
334 |
|
Power plug, rewirable, 20A/250V, Brazil NBR 14136, 2P+E, Pin Ø 4.8mm, light grey |
418 |
|
Power plug, rewirable, 20A/250V, Brazil NBR 14136, 2P+E, Pin Ø 4.8mm, black |
2661 |
|
Single socket outlet, 20A/250V, Brazil NBR 14136, 2P+E, Surface Mounting, white |
10 |
|
Power supply cord, Length 3.0m, Brazil Plug Nr. YP-05 (20A, NBR 14136), 2P+E, Pin Ø 4.8mm, Rated current 16A, 250V, H05VV-F3G1.50mm², End two 50/12mm, black |
463 |
|
Non stock products have a minimum order quantity. |
|
|
|
|
|
|
|
|
|
If the desired product is not listed, please contact our sales office. |
Specifications and information are nominal and are subject to change without notice.